Hioki CT6700, Instruction Manual, Page: 18 / 72

14
Usage Notes
CAUTION
• To avoid damage to the output connector on
the terminator or the BNC input terminal’s
locking mechanism on the waveform measuring
instrument, do not rotate with both terminals
connected. Additionally, exercise care to ensure
that connections are not subject to stress.
• Do not place foreign objects between the
mating faces of the sensor head, insert foreign
objects into the gaps of the sensor head, or
touch the mating faces. Doing so may worsen
the performances of the sensor or interfere with
clamping action.
• Do not apply a static electricity or other source of
high voltage to the sensor. Doing so may damage
its internal Hall elements and circuitry.
• Do not short-circuit the output terminal and do not
input voltage to the output terminal. The device
may be damaged.
• Note that the device may be damaged if the
applied current exceeds the measurement range.