manualshive.com logo in svg

Hioki CM4371-50, Instruction Manual

Share
Download
Hioki CM4371-50 Instruction Manual Download Page 59

53

Wireless communications function

Z3210-to-Excel

®

 direct data entry function (Excel

®

 direct input function, 

HID function)

Concurrent use of GENNECT Cross and HID function is not available.

The human interface device (HID) profile, with which the Z3210 Wireless Adapter is equipped, is 

a profile same as that wireless keyboards use.

HID ON

Preparatory to data entry, open an Excel

®

 file on your mobile device or computer and 

choose a cell. When the instrument’s display freezes, the measured values will be 

entered on the cells. The use of this function with the automatic hold function enabled 

comes in handy. (p. 32)

HID OFF

When you wish to use GENNECT Cross, disable the HID function.

The setting whether the HID function has been enabled or disabled will not be saved in the 

instrument but in the Z3210. 

Measured value is entered.

HIOKI CM4371C961-00

Summary of Contents for CM4371-50





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands