Hioki CM4002, Instruction Manual

Page: 70 / 104

62
Wireless Communications Function
Event Recording Function (EVENT)
The event recording function logs the data when measured values exceed a desired threshold
value, which can be set with GENNECT Cross. For details, see the Help function in GENNECT
Cross. The number of recorded events can be checked using the instrument.
Hold down
the key for 1 s
or longer.
Displays the number of
events.
1 s
• An event with a duration time of less than
200 ms may not be accurately measured,
failing to detect the event.
• The instrument can record up to 999 events.
The event recording will terminate when the
recorded events reach 999 in number.
When you start another event recording
session, the instrument will delete previously
recorded data.
HIOKI CM4002A961-02