Hioki CM4002, Instruction Manual

Page: 67 / 104

59
Wireless Communications Function
• The Z3210 uses the 2.4 GHz band wireless technology.
When there is a device that uses the same frequency band such as a wireless LAN (IEEE 802.11.b/g/n)
near your mobile device, the communication may not be established.
When the instrument is placed on the floor or ground, the communication distance becomes
shorter. It is recommended that you move the instrument from the floor or ground and place it on a
desk or table or hold it by hand.
Using the wireless communications function
1
Connect the Z3210 Wireless Adapter (option) into the instrument. (p. 29)
2
Install GENNECT Cross on your mobile device.
3
Turn on the instrument, and then enable the wireless communications function.
Off
(Default setting)
Hold down the key for
1 s or longer.
The icon will appear.
(Wireless communications function
is enabled.)
1 s
+
Hidden: Wireless communications
function is disabled.
Blinking: Communicating with your
mobile device.
Continued on next page →
HIOKI CM4002A961-02