Hioki CM4002, Instruction Manual

Page: 39 / 104

31
Inspection Prior to Measurement
1.3 Inspection Prior to Measurement
Check Inspection details Remedy

Check the following points visually.
• The instrument is not damaged or cracked.
• No internal circuit is exposed.
If the instrument is damaged, ask for
repair. Otherwise, the operator may
receive an electric shock.

No segments are missing.
Pressing the key while holding down the key
during a power-off condition allows all segments to appear
while holding down the
key.
If any segment is missing, ask for
repair.

The mark does not blink. When the mark blinks, replace
the batteries with new ones. The
batteries are exhausted.
(p. 25, p. 29)
HIOKI CM4002A961-02