manualshive.com logo in svg

Hioki CM3286-50, Instruction Manual

Share
Download
Hioki CM3286-50 Instruction Manual Download Page 67

61

Max., Min., and Average Values (MAX/MIN/AVG)

Max., Min., and Average Values (MAX/MIN/AVG)

2

1

To object under measurement

Present value

: To switch the main display.

(Hold down for 1 s or longer.) or 

  (switching functions):  MAX/MIN/AVG 

measurement function 

is cleared.

 •Switches to manual range when it is automatic range. (

 appears)

 •The maximum, minimum, and average measurement will be continued during hold function.

 •The maximum, minimum, and average function cannot be used during Wh function and phase 

detect function operation.

 •The maximum and minimum values are automatically stored just before the instrument turns 

off due to low battery voltage. Next time the instrument is turned on, the saved values will be 

displayed. (The measured values can be cleared by pressing the 

HOLD 

key.)

HIOKI CM3286C961-00

Summary of Contents for CM3286-50























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands