manualshive.com logo in svg

Hioki BT5525, Instruction Manual, Page: 110 / 215

Share
Download
Hioki BT5525 Instruction Manual Download Page 110

110

USB Interface

8.4  USB Interface

Installing the USB driver

When the instrument is connected to a computer, the USB driver is automatically installed. Since 
the OS standard driver is installed, it is not necessary to install another driver.

Installation procedure

1 

Log into the computer as an administrator.

2 

Connect the instrument and computer using a USB cable.

The USB driver is automatically installed.

After the installation is completed, the instrument is recognized.

 •

For Windows 10 or Windows11, 

[USB Serial Port (COMx)] 

is displayed at the device manager port (COM 

and LPT) when the USB is properly recognized. The COM number varies depending on the environment.

 •

Even if an instrument with a different serial number is connected, there may be a notification that a new 

device has been detected.

Connecting the USB cable

Connect a USB cable type AB (commercially available) to the USB connector of the instrument.

CAUTION

 

„

Do not unplug the USB cable while communications are ongoing. 

Doing so could damage the instrument or computer.

Type B

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Reviews:

No comments