Hioki BT4560, Instruction Manual, Page: 42 / 62

39
Transit to Trigger Waiting State
Syntax Command :INITiate
Description
Switches triggering from the Idle State to the Trigger Wait State.
Example
Disable continuous measurement, and read one value for each trigger event.
Example
:TRIG:SOUR IMM ........
:INIT ................................
Set the trigger source to internal triggering.
Switch triggering to Trigger Waiting State.
Trigger a single measurement immediately upon internal
triggering.
Example
:TRIG:SOUR EXT ........
:INIT ................................
Set the trigger source to external triggering.
Switch triggering to Trigger Waiting State.
Trigger a single measurement when an external triggering
signal is received.
Note
• When this command is received, automatically switches
to
:INITIATE:CONTINUOUS OFF
.
• When there is an internal trigger (trigger source <IMMEDIATE>), triggering promptly
occurs and enters the idle state.
• When there is an external trigger (trigger source <EXTERNAL>), the external trigger
wait state is entered. When a trigger is received, a single measurement is performed
and enters the idle state.