Hioki BT4560, Instruction Manual, Page: 34 / 62

31
Set and Query Judgement of Voltage Component Comparator with Absolute Value
Syntax
Command :CALCulate:LIMit:ABS
<1 / 0 / ON / OFF >
Query :CALCulate:LIMit:ABS?
Response
<ON / OFF >
Example
:CALC:LIM:ABS ON
Sets the judgement of the voltage component comparator to be performed with the
absolute value.
:CALC:LIM:ABS?
ON
The judgement of the voltage component comparator has been set to be performed with
the absolute value.
Set and Query Resistance Component Comparator Upper/Lower Limit
Syntax Command
:CALCulate:LIMit:RESistance
<Upper limit>,<Lower limit>
Query
:CALCulate:LIMit: RESistance?
Response
<Upper limit (Ω)>,<Lower limit (Ω)>
Command
<Upper limit (Ω)> = -3.00000E-03 to +1.20000E-01(NR3), or OFF
<Lower limit (Ω)> = -3.00000E-03 to +1.20000E-01(NR3), or OFF
If the upper limit is set to a value out of above range, the upper limit becomes
OFF.
If the lower limit is set to a value out of above range, the lower limit becomes
OFF.
Query
<Upper limit (Ω)> = -3.00000E-03 to +1.20000E-01(NR3), or OFF
<Lower limit (Ω)> = -3.00000E-03 to +1.20000E-01(NR3), or OFF
Example
:CALC:LIM:RES 0.1, 0.05
The upper and lower limits (regardless of the range) are 100mΩ and 50mΩ, respectively.
:CALC:LIM:RES 5.0,0.05
:CALC:LIM:RES?
OFF,+5.00000E-02
The upper and lower limits (regardless of the range) are OFF and 50mΩ, respectively.
:CALC:LIM:RES 0.1,OFF
:CALC:LIM:RES?
+1.00000E-01,OFF
The upper and lower limits (regardless of the range) are 100mΩ, and OFF, respectively.
Note
If the upper limit is set to a value smaller than the lower limit, the upper limit becomes the
same value as the lower.