Hioki BT3564, Instruction Manual, Page: 43 / 210

3.7 Displaying Measurement Results
37
3
Chapte
r 3
Measur
em
en
t
Overflow is indicated by “ OF ” or “ -OF ” on the display, caused by one of the fol-
lowing:
Overflow Display
Display Condition
OF
• The measured value exceeds the limit of the current
measurement range
• The test object impedance exceeds the input level.
• When the result of relative value calculation is larger
than +99.999%.
-OF
• The measured value is below the limit of the current
measurement range
• The test object impedance exceeds the input level (in
the negative direction).
• When the result of relative value calculation is smaller
than -99.999%.
HIOKI BT3564A961-02