Hioki BT3564, Instruction Manual, Page: 147 / 210

8.6 Message Reference
141
8
Chapt
er 8
RS-232
C
/GP-I
B
In
te
rf
aces
Set and Query EXT I/O Lock
Syntax Command
:SYSTem:ELOCk
<1, 0, ON or OFF>
Query :SYSTem:ELOCk?
Response <ON or OFF>
ON ........ EXT I/O control is disabled (preventing inadvertent opera-
tions from electrical noise).
OFF....... EXT I/O control is enabled.
Example Command
:SYST:ELOC ON
Query
:SYST:ELOC?
Response
ON
Note This function affects only command input.
Set Local Control
Syntax Command
:SYSTem:LOCal
Note Switches from remote control (REMOTE indicator lit) to local control (by panel
keys).
Save and Load Measurement Values
Syntax Command :SYSTem:SAVE
<1 to 126>
:SYSTem:LOAD
<1 to 126>
Note • Attempting to load a panel number that has not been saved results in an execu-
tion error.
• Up to 126 measurement configurations can be saved and loaded. Refer to
“Panel Save and Load Functions” for details.
Backup Current Measurement Configuration
Syntax Command
:SYSTem:BACKup
Description Command The current measurement configuration (settings) is backed up so
that when power is turned on the next time, the same configuration is
restored.
Note Saved panel and backup settings are stored in the instrument’s EEPROM. Be
aware that the number of times that the EEPROM can be rewritten is limited (to
about a million times).
HIOKI BT3564A961-02