Hioki 9196, Instruction Manual

Page: 31 / 44

5
HIOKI
1
2
3
4
5
6
7
8
9
10
11
付録
索引
• Before turning the product on, make sure the source volt-
age matches that indicated on the product's power connec-
tor. Connection to an improper supply voltage may damage
the product and present an electrical hazard.(100 to 240
ACV)
• To avoid electric shock and ensure safe operation, connect
the power cable to a grounded (3-contact) outlet.
• The 9190 VOLTAGE APPLY PROBE continuously outputs
voltage while the voltage application button is being
pressed. While it is outputting, or any time that the voltage
application button is being pressed intentionally, a danger-
ous amount voltage is present is at the tip of the probe. To
avoid electrical shock, do not touch either the device under
test or the probe tip.
• The 9196 is only able to operate to its full capability after it has
been properly grounded. Always use the power cord
(grounded three-core power cord) that is supplied with the unit
to ground the unit.
• When the type toggle switch of the 9196 is set to CF, the pro-
tective resistance (10 k
Ω
) is connected to the internal output
circuit in series. If the output current is large, the protective
resistance cause a reduction in voltage, and the actual output
voltage is reduced.
Before connection and powering on