Hioki 8910, Instruction Manual

Page: 46 / 150

4.2 Program Setup
38
4.2.1 System requirements
To use the program, the following hardware and software are required:
4.2.2 Installation
Follow the procedure below to install the program.
1.
Close all active applications.
2.
Insert the CD-R provided into the CD-ROM drive.
3.
Execute the Setup file on the CD-R.
4.
The installer starts up. Follow the instructions displayed on the screen
to install the program.
4.2 Program Setup
Personal computer
IBM PC/AT compatible
Pentium 133 MHz or higher (recommended)
Min. 64 MB RAM (recommended)
Free hard disk space: 5 MB
RS-232C capability
CD-ROM drive (to install software)
OS
Microsoft Windows 95 (OSR2 or later)
Windows 98
Windows NT4.0 (SP3 or later)
Windows Me
Windows 2000
Windows XP
Assuming that your CD-ROM drive is drive R
(1) Click the [ Start ] button.
(2) Select [ Run... ] on the Windows Start Menu.
(3) Enter as following in the text box.
Using the English file : R:\8910SET\ENGLISH\SETUP.EXE
Using the Japanese file: R:\8910SET\JAPANESE\SETUP.EXE
(4) Click [ OK ].
(otherwise, substitute the appropriate drive letter for R)