Hioki 8860-50 Instruction Manual Download Page 58

Page: 58 / 490

2.7 System Screen

2.7.2 Communication (Comm) Settings Screen

To open the Comm Settings screen

to select the menu item.

To open from the Opening Screen

Press the

F7 [System]

key.

Press the

SUB MENU

keys

Use the

CURSOR

keys to move the cursor to the

Function menu, and press the

F7 [System]

key.

LAN settings:

[Communication]

page

FTP settings:

[File]

page

Web Server settings:

[Web]

page

E-Mail settings:

[Mail]

page

Communication command settings:

[Command]

page

Press the

SHEET/PAGE

keys to select

a page.

To open from the Waveform or

Settings screens

The System screen
appears.
(Also appears by
holding the

SET

key)

Refer to the Analysis and Communication Supplement for details
of the settings.

Basic Settings

• Host name
• Authorization User Name
• Authorization Password

Interface Settings

• LAN
• DHCP Setting
• IP Address
• Subnet Mask
• Gateway
• DNS and WINS Settings

Applies changed settings.

[Communication] Page

Configures the interface for communication with this instrument from a PC.

("Chapter 4 Communications Settings" in the

Analysis and Communication Supplement

)

Summary of Contents for 8860-50











































































































































































































































































































































































































































































































Search results

Summary of Contents for 8860-50

Reviews:

Brands by name

Popular brands

Hioki 8860-50, Instruction Manual

Search results

Summary of Contents for 8860-50

Reviews:

Brands by name

Popular brands