Hioki 8860-50, Instruction Manual

Page: 47 / 490

2.5 Settings Screen
35
2
Chapter 2
Ope
rat
ing Keys a
nd Screen Conte
nt
s
2.5.3 Trigger Settings Screen
To open the Trigger Settings screen
Press the
SET
key.
Press the
SUB MENU
keys
1
2
(The Settings screen appears.)
3
Press the
SHEET/PAGE
keys to select a page.
to select the menu item.
Analog waveform trigger settings: [Analog] page*
Logic waveform trigger settings: [Logic] page
(* [Analog 1 - 4] with Model 8860-50, or [Analog 1 - 4] and
[Analog 5 - 8] with Model 8861-50)
(Memory Function)
Set trigger criteria for the Memory Function.
Timer Trigger Settings
(p. 162)
Set recording start and end
times, and set timing when
desired to apply a trigger
within a specified period.
External Trigger
Settings (p. 166)
Set this to accept triggering
from a signal input on the Ex-
ternal Trigger terminal.
Trigger Mode Setting (p. 138)
Sets trigger activation criteria.
Pre-Trigger Settings
(p. 140)
Make these settings to record
prior to triggering. When Trig-
ger Priority is On, triggering is
allowed during the Pre-Trig
Wait.
Analog Trigger Settings
(p. 146)
Logic Trigger Settings
(p. 159)
Combining Method
(AND/OR) for Multiple
Trigger Sources
(p. 139)
(Recorder Function)
Trigger Timing Setting
(p. 144)
Set trigger criteria for the Recorder Function. Except for the following, settings are the same as for the
Memory Function.
Set analog waveform triggers (p. 146).
[Logic] Page
Set logic waveform triggers (p. 159).
[Analog] Page