manualshive.com logo in svg

Hioki 8860-50, Instruction Manual

Share
Download
Hioki 8860-50 Instruction Manual Download Page 468

Appendix 2 Reference

A

42

Appendix 2.6 Compatible External Printers

Printers that can be used are compatible with HP’s
WindowsCE5.0 printers (USB connection).
Printers with confirmed compatibility: 
• HP deskjet 5551
• HP deskjet 5740
• HP deskjet 450cbi

 *



To move the USB printer cable from the PC to the
instrument, disconnect it from the PC, turn the
printer off and back on, then connect it to the
instrument. 

• Before printing, check to be sure that the power is on and that paper is loaded.

• Select 

[USB] 

as the printer output destination.

• Do not turn the power off or disconnect the cable during printing.

• When the USB printer cable is disconnected from a PC and connected to the

USB port on this instrument, the instrument may not print. In this case, discon-
nect the cable from the instrument, turn the printer off and on, then reconnect
the cable to the instrument.

Summary of Contents for 8860-50











































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands