Hioki 8860-50, Instruction Manual

Page: 42 / 490

2.5 Settings Screen
30
Settings for Saving
Waveforms
Set the save destination and
save name.
(Real-Time Saving Function) [Basic] Page
Set real-time recording conditions such as the timebase (horizontal axis), recording length (recording
duration) and save destination.
See "Chapter 9 Measuring with Real-Time Saving" (p. 235)
Recording Condition Set-
tings
Select the method of data ac-
quisition: one-shot (single),
continuous or timer.
Whole Waveform Time-
base
Set the timebase (time per divi-
sion) for the whole measured
waveform (for envelope wave-
forms).
Save Destination Info
Usable settings are limited by
the available space on the
save destination.
Recording Length
Settings
Set the length (recording dura-
tion) to record each time data
is acquired or set the recording
time.
Timebase or Sampling
Rate Setting
Set the timebase of the hori-
zontal axis (time per division).
The sampling rate changes ac-
cordingly.
(Real-Time Saving Function) [Use Ch] Page
Measurement Channel
Settings
Select the analog and logic
channels to use for measuring.
The 8958 16-Ch Scanner Unit
cannot be selected.
Select the channel or channel numbers to use.
See "Chapter 9 Measuring with Real-Time Saving" (p. 235)
Select analog channels to use
for measuring.
Select logic channels to use
for measuring.
Settings can be reset.