Hioki 8860-50, Instruction Manual

Page: 384 / 490

13.3 Making System Settings
372
Media Check
To open the screen:

Press the
DISP
key

Press the
F7
[System] key

Select with the
SUB MENU
keys

Init Settings screen
See Screen Layout (p. 51)
Operating Key Procedure
1
CURSOR Move the cursor to the [Media Check] button.
F1 Select [Execute].
The [Media Check] dialog box appears.
2
CURSOR
F1 to F8
Move the cursor to the media selection field and
select the media.
Only connected media are shown.
3
CURSOR
F1 to F8 Select the button for the check to perform.
The results for the selected check are displayed.
4
CURSOR
F1 Select the [Close] button.
PC CARD #1
PC CARD #2 Check whether a PC Card is normal.
HDD
Check whether a hard disk is normal.
USB
Check whether a USB disk is normal.
Device
Information Display device information.
Media
Information Display media information.
Read/Write
Check
Perform a read/write check.
(Several minutes may be required.)
(The media must have adequate free
space.)
Execute All
Execute all of the above.
Results
1
Before executing this test
Check to be sure that media is inserted or connected.
3
4
2
In the [Read/Write Check] , data is actually written to and read from the media,
which may damage the media or result in the loss of recorded data. Do not per-
form this check using media on which important data is recorded.