Hioki 8860-50, Instruction Manual

Page: 28 / 490

2.1 Operating Keys
16
7
Input Waveform Settings
See "5.7 Setting Input Channels from the Waveform Screen" (p. 134)
"5.1 Analog Channel Settings" (p. 116)
UNIT key
Selects a Unit (module) (Waveform or Channel Settings screen).
CH key Select a channel (Waveform or Channel Settings screen).
RANGE/POSN
knobs
Sets the measurement range of the input channels, waveform display
position (zero position of the vertical axis), and whether or not they are
displayed (available on the Waveform and Channel Settings screens).
To set the measurement range: turn the inner RANGE knob.
To change the waveform display position (zero position): turn the
outer POSN knob.
To turn a waveform display on or off: press the inner RANGE knob.
TIME/DIV key Sets the acquisition speed (timebase) for the input waveform (Wave-
form and Status Settings screens).
See "4.4 Setting Measurement Configuration on the Waveform
Screen" (p. 114)
"4.2 Setting Measurement Configuration (Status Settings
Screen)" (p. 86)
RANGE
knob
POSN knob