Hioki 8860-50 Instruction Manual Download

Page: 244 / 490

8.15 Inserting and Searching for Event Marks on a Waveform

232

An event mark can be searched for by selecting it in the Event Mark List (acces-
sible from the EVENT MARK dialog).

8.15.2 Event Mark Searching

Select the number of the event mark to
search for, and press the F1 [Jump] key.

EVENT MARK dialog

Event marks are listed in the order they
were inserted.

Using the

CURSOR

keys, move the cursor

to the

[Method]

item in the dialog, and

press the

[Show Mark List]

key.

The Event Mark dialog appears.

SEARCH dialog

Press the

FUNCTION MODE

key to enable

the FN mode, then press

[Search]

The Search dialog appears.

Event mark

Summary of Contents for 8860-50











































































































































































































































































































































































































































































































Search results

Summary of Contents for 8860-50

Reviews:

Related manuals for 8860-50

Brands by name

Popular brands

Hioki 8860-50, Instruction Manual

Search results

Summary of Contents for 8860-50

Reviews:

Related manuals for 8860-50

Brands by name

Popular brands