Hioki 8860-50, Instruction Manual

Page: 106 / 490

4.2 Setting Measurement Configuration (Status Settings Screen)
94
With the REC&MEM function, allowable timebase combinations for Memory and Recorder waveforms
are limited
.
This applies to the Memory function only.
Different sampling rates can be set for Timebase 1 and Timebase 2. The follow-
ing channels can be set to Timebase 2.
• Channels on which you want to measure with a slower sampling rate than that
of Timebase 1 (p. 95).
• Channels on the Model 8958 16-Ch Scanner Unit when used together with
another input module (Timebase 2 is then set exclusively for the 8958) (p. 96).
Memory
waveform
Recorder waveform
100 ms 200 ms 500 ms 1 s 2 s 5 s 10 s 30 s 50 s 60 s 100 s 120 s 300 s 600 s 1800 s 3600 s
10

s
               
20

s
               
50

s
               
100

s
               
200

s
               
500

s
               
1 ms
               
2 ms
               
5 ms
               
10 ms
               
20 ms
               
50 ms
×
              
100 ms
× ×
             
200 ms
× × ×
            
500 ms
× × × ×
           
1 s
× × × × ×
          
2 s
× × × × × ×
         
5 s
× × × × × × ×
        
10 s
× × × × × × × ×
       
30 s
× × × × × × × × ×

×
    
50 s
× × × × × × × × × ×

×
   
60 s
× × × × × × × × × × ×
    
100 s
× × × × × × × × × × × ×
   
120 s
× × × × × × × × × × × × ×
  
300 s
× × × × × × × × × × × × × ×
 
4.2.3 Setting Different Sampling Rates
Setting a slow sampling rate for Timebase 2 results in longer preparation time
prior to the start of storage.