Hioki 3504-40 C HiTester, Instruction Manual

Page: 84 / 292

5.2 BIN Measurement Function (Model 3504-50, 3504-60 only)
78
Measurement
method 1 Make settings using the upper limit and lower limit values
(count setting).
(To make settings using a reference value and the upper limit and lower limit val-
ues refer to "Measurement method 2" (p. 82))
1.
Use to switch to the BIN measurement mode.
2.
Press .
3.
Press to enter the BIN1 upper limit value setting mode.
4.
Use the numeric keypad or the arrow keys to enter an upper limit
value for BIN1 and then press .
Settable Range: OFF, -199999 to 999999 (When setting to "OFF"( p. 87))
Move to the digit ........
and
Change the number .. and
Setting a value lower than the lower limit value will not produce an error, but
accurate judgment will not be possible.
At time of shipment, it is set to ” - - - - - - ” (OFF).
(
Light up
)
(SUB display area)
Flash
BIN
number
To make settings from an optional setting
mode, press
to select the setting
mode while ”1 to 14” is flashing, and then
press .
Setting modes: BIN1 to 14 upper and
lower limit values
 D upper and lower
limit values  BIN1 to 14 upper and
lower limit values...
Flash
(SUB display area)
Light up
Upper limit value