Hioki 3504-40 C HiTester, Instruction Manual

Page: 104 / 292

6.3 Evaluate Contact Check Function
98
1.
Press .
The upper part of the MAIN display area displays the menu contents and the
lower part displays the setting information.
(Refer to "Menu display organization" (p. 13) for menu order)
2.
Use or to select the “LEV.ChK” menu item.
3.
Press to enable or disable the measurement level monitoring
function.
It will toggle “on” and “oFF” each time is pressed.
4.
Press to confirm the measurement level monitoring func-
tion as on or off.
When “oFF” is selected, “JudGE” (Judgment mode setting screen) will be dis-
played in the MAIN display area.
When “on” is selected, the leftmost LED showing the limit value in the middle row
of the SUB display area will flash.
5.
When "on" is selected.
Enter the limit value using
or the numeric keypad.
(If you enter a number, each digit moves one place to the right.)
Settable range: 0.01 to 100.00 (%)
Move to the digit ........ and
Change the number
...
and
6.3.2 Measurement Level Monitoring Function
Settings
(Measurement level monitoring function setting screen)
Menu content
“on” or “oFF” flashes.
(MAIN display area)
(SUB display area / “on” setting)
The limit value flashes