2.3 Connecting the CLAMP ON AC/DC SENSOR
33
1
2
3
4
5
6
7
8
9
10
M
easurement
Preparat
io
ns
❖
The sensor’s specifications:
See Section 6.1.1 "Current Measurement" (page 108)
2.3 Connecting the CLAMP ON AC/DC SEN-
SOR
• To prevent damage to the meter, never connect or disconnect a
sensor while the power is on, or while the sensor is clamped
around a conductor.
• When disconnecting the output connector of the clamp-on sen-
sor from the 3290-10 sensor jack, be sure to hold it by the metal
part and pull it upward. Because the connectors lock, pulling or
twisting the cable can damage the cable.
Connecting
Disconnecting
Grasp the upper part of the
metal portion
The wide part is toward
the top of the meter
Output Connector
Hold the metal part
1.
Confirm that the 3290-10 is
turned off.
2.
Remove the dust cap from
the sensor jack and insert
the plug from the clamp-on
sensor.
The clamp-on sensor model
is recognized automatically.
Connecting the Clamp Sensor
Summary of Contents for 3290-10
