Hioki 3144-20, Manual, Page: 59 / 118

55
Chapter 3 Setup and Measurement
Set the current date and time on the 3144-20.
Once saved, the date and time will be stored on
the 3144-20.
When the instrument is connected to a PC through
the USB cable, the time of the PC's system clock
can also be set using the supplied PC software.
❖
4.3, "Setting the Clock" (page 71)
1.
Activate date and time setup mode.
Press the DATE/TIME key for 1 sec. on the moni-
toring screen [MONI] (with the PEAK HOLD func-
tion OFF).
The digits of the year flash.
2.
Set the date and time.
Move the flashing digits to the position you want to
change.
Each pressing of
PEAK HOLD shifts the flashing
as follows:
Year
→
Month
→
Day
→
Hour
→
Minute
→
Sec-
ond
→
End
Change the flashing digits.
: Values DOWN
: Values UP
3.6 Setting Date and Time