manualshive.com logo in svg

Hioki 2300 Smart Site, Instruction Manual, Page: 181 / 366

Share
Download
Hioki 2300 Smart Site Instruction Manual Download Page 181

168

9  2331-20 POWER METER MODULE

9.1.5

Accessory and Option

Accessories

None

Option

9695-02  CLAMP ON SENSOR (50 Arms)
9695-03  CLAMP ON SENSOR (100 Arms)
9661-01  CLAMP ON SENSOR (500 Arms)
9765*

 CLAMP ON SENSOR (5 Arms, For CT secondary side)

9238

 CLAMP SENSOR CABLE

L9019-02  VOLTAGE CORD (Red/ Black)
L9019-03  VOLTAGE CORD (Red/ Black/ Yellow)
L9019-04  VOLTAGE CORD (Red/ Black/ Yellow/ Blue)

* Not complied with the CE marking.

When using Model 9765

• To avoid short circuits and potentially life-threatening haz-

ards, never attach the product to a circuit that operates at
more than 30 VAC, or over bare conductors.

• This product should only be connected to the secondary

side of a breaker, so the breaker can prevent an accident if
a short circuit occurs. Connections should never be made
to the primary side of a breaker, because unrestricted cur-
rent flow could cause a serious accident if a short circuit
occurs.

Summary of Contents for 2300 Smart Site















































































































































































































































































































































































Reviews:

No comments