manualshive.com logo in svg

Hioki 2300 Smart Site, Instruction Manual, Page: 106 / 366

Share
Download
Hioki 2300 Smart Site Instruction Manual Download Page 106

6  2305-20 INSTRUMENTATION MODULE

93

1

2

3

4

5

6

7

8

9

APPX

IDX

6.1.1 Product Overview

• The 2305-20 is a measurement module of Hioki "Smart Site"

(remote measurement system). 

• This module measures and records DC analog signal at regular

intervals.

• This module measures up to  ±50 VDC and 100 mADC (including 1

V to 5 VDC and 4 mA to 20 mADC) used for instrumentation.

• One module can be used for measurement at two locations.
• The 2304-21 is used with the power supply module, communica-

tions module, and module base.

2305-20
INSTRUMENTATION MODULE 

6

6.1 Overview

Number of measurement channels

(Voltage / Current) 2 CH

Measurement range

±50 mV / 500 mV / 5 V / 50 V,

 -2 mA to +110 mA

(Conceptual image)

Summary of Contents for 2300 Smart Site















































































































































































































































































































































































Reviews:

No comments