Hinowa LightLift 15.70 3S, Technical Course Booklet

Page: 92 / 137

92
10.1.9.8.5.2 BEEPER
By this page, if is installed the optional warning buzzer , it’s
possible to set the motion alarm, after having inserted the
relevant password “8365”.
The motion alarm is activated depending on the BEEPER
menu setting.
If it’s selected ALL the warning buzzer is activated at all the
machine movements, both aerial part and ground part.
If it’s selected FALL the warning buzzer is activated at the
aerial part lowering moment and telescope retraction.
If it’s selected WARN the warning buzzer is activ ated in the
same condition or the remote control beeper.
10.1.9.8.5.3 SECOND SPEED
By this page it’s possible to set the second speed (Hare), after
having inserted the relevant password “ 5216 ”, pressing
button n.1 “ON” second speed will be activated, pressing
button n.2 “OFF” second speed will be deactivated.
10.1.9.8.5.4 ELECTRIC MOTOR
By this page it’s possible to set the electric motor power
setting, after having inserted the relevant password “3522”,
pressing button n.1 “2,2 KW” machine will be set for 2,2 Kw
electric mot or, pressing button n.2 “1,2KW” it will be set for
1,2 Kw electric motor.
The main difference between the two settings is in the auto-
stabilization procedure steps timing.
10.1.9.8.5.5 LAMPS
By this page it’s possible to set the outriggers lights, after
having insert ed the relevant password “6661”, pressing
button n.1 “ON” outriggers lights will be steady on while they
are touching the ground, pressing button n.2 “FLASH”
outriggers lights will be flashing while they are touching the
ground.
10.1.9.8.5.6 CHK INC
This menu is used by Hinowa.
BEEPER
40 1 ALL *
41 2 FALL
42 3 WARN
43
44 9 ESC
EL MOT.
50 1 2,2 KW *
51
52 2 1,2 KW
53
54 9 ESC
LAMPS
55 1 ON
56
57 2 FLASH *
58
59 9 ESC
D SPEED
45 1 ON *
46
47 2 OFF
48
49 9 ESC