Hinowa LightLift 15.70 3S, Technical Course Booklet

Page: 88 / 137

88
10.1.7 WORKING HOURS
This page indicates the machine working hours displaying
engine working hours and electric motor working hours.
On Lithium machines have to be considered only the electric
motor hours.
KEY indicates the hours with main key switched ON.
To adjust the working hours, check the dedicated procedure.
10.1.8 JOYSTICK
By this page it’s possible to verify the proper functioning of
the joysticks, once selected one joystick by buttons n.1 and
n.2, joystick enumeration is indicated here below, the display
will show its position, expressed in step from 0 (rest position)
to 127 (joystick fully pressed up or down).
Moving the selected joystick it’s so possible to check its
proportionality and its end of the stroke (about 127 steps)
both forward and backward.
10.1.9 SETUP
SETUP menu gives the access to other settings and under
menus.
The here aside picture shows the SETUP menu display, from
SETUP menu pressing button from n.1 to n.8 it’s possible to
enter into several pages as for instance pressing button n.1
display will show the accelerometers menu. Pressing button
n.9 (ESC) brings back to the SERVICE menu main display.
WORK. HOURS
ENGINE:
7
ELEC. MOT
2
KEY:
28
9 ESC
JOYST 1
127
1 PREV
2 NEXT
9 ESC
1 8 7 6 5 4 3 2
SETUP
10 1 ROTATION
11 2 VERSION
12 3 EXTRA
13 4 ORA
14 5 PASSWORD
15 6 DATA
16 7 LOAD
17 8 INCLIN.
18
19 9 ESC