LUBRICATION (J05E)
13–15
OVERHAUL
EN01F02114120402008002
REMOVING THE OIL PUMP
1.
REMOVING THE FLYWHEEL HOUSING
(1)
Remove the flywheel housing.
2.
REMOVING THE TIMING GEAR
(1)
Remove the main idle gear and sub idle gear.
3.
REMOVING THE OIL PUMP
(1)
Unfasten the 2 bolts and mount 2 guide bolts to the oil pump to
prevent dropping.
(2)
Unfasten the remaining bolts (7 pcs.) to remove the oil pump from
the cylinder block.
NOTICE
•
To loosen the adherence and facilitate the removal, tap the oil
pump mounted with guide bolts using the plastic hammer in
advance.
•
Prepare the reservoir and clean clothes to collect dripping
engine oil when removing the oil pump.
DISASSEMBLING THE OIL PUMP
1.
REMOVING THE DRIVEN GEAR
(1)
Remove the driven gear from the oil pump.
NOTICE
The drive gear is press-fitted into the shaft and nonremovable.
GUIDE BOLTS
GASKET
OIL PUMP
SHTS021271200030
OIL PUMP
DRIVEN GEAR
DRIVE GEAR
SHTS021271200031