COOLING (J05E)
12–4
INSPECTION
EN01F02127110402019002
INSPECTION BEFORE SERVICING
1.
INSPECTING THE RADIATOR
(1)
Inspect the radiator visually for coolant leakage, crack and dam-
age. If found defective, replace the radiator. If the coolant
decreases frequently and requires refilling, inspect the radiator,
hose and pipe for coolant leakage.
ON-VEHICLE CLEANING
1.
CHECK FIN FOR BLOCKAGE
(1)
If the fins are clogged, wash them with water or a steam cleaner,
then dry them with compressed air.
NOTICE
•
If the steam cleaner is too close to the core, there is a possi-
bility of damaging the fins, so keep the following injection
distances.
•
If the fins are bent, straighten them with a screwdriver or pli-
ers.
•
Do not expose electronic components to water.
SHTS021271100003
Injection Pressure
kPa {kgf/cm
2
, lbf/in
2
}
Injection Distance
mm {in.}
2,942-4,903 {30-50, 427-711}
300 {11.811}
4,903-7,845 {50-80, 711-1,138}
500 {19.685}
