EXHAUST (J05E)
11–55
MOUNTING THE FUEL ADDITION VALVE
1.
CAUTIONS
! CAUTION
•
While working, do not allow dirt and water to enter the parts.
•
Before mounting parts, make sure that there is no dirt on the
connection between them.
•
Air enters the fuel pipe in the process of mounting the pre-
fuel filter case. After mounting is completed, thoroughly
purge air from the fuel pipe.
2.
MOUNTING THE FUEL ADDITION VALVE
(1)
Replace with a new gasket and mount the folder to the exhaust
pipe (ATC) with 3 nuts.
Tightening Torque:
36 N·m {367 kgf·cm, 26.5 lbf·ft}
(2)
Replace with a new O-ring and gasket and mount the fuel addition
valve to the folder.
! CAUTION
•
Apply engine oil to the O-ring. Use care not to get the O-ring
jammed when inserting.
•
Do not apply excessive force or weight to the connector to
avoid the risk of breakage.
•
Check the O-ring seal for dirt before mounting.
EXHAUST PIPE
(ATC)
FOLDER
GASKET
SHTS021271000080
O-RING
FUEL
ADDITION
VALVE
GASKET
FOLDER
SHTS021271000081
