PEM200 User Manual
27
1. Double click the displayed retardation to highlight the setting and then enter a new
retardation using the keyboard.
2. Click on the up
▲
or down
▼
arrow to the right of the retardation display to adjust the
retardation setting by single digits.
Retardation Units:
The retardation units field displays the selected retardation unit.
Retardation units can be set to display in fraction of wavelength (λ) radian (rad) or
degrees ( º). To change the retardation unit, click on the arrow to the right of the
retardation units field and click on the desired retardation unit. The retardation
displayed will adjust accordingly.
Frequency:
The frequency field displays the first (1f) harmonic operating frequency of
the head-set being used.
Update Frequency:
Press the “Update” button.
Scan Panel
The scan panel will display additional fields to set up a wavelength scan. The panel will
display the ending wavelength and retardation. The retardation and beginning
wavelength is set in the main window as described above.
Select the
View
tab and select
Show Scan Panel
to open the scan panel on the
window.
Figure 6.4 Accessing Scan Panel
