76
4. Move to the end of a list: Space-4-5-6
The following keystrokes are valid only in a "file list".
1. Jump to folder or file list: Space-5-6
2. Move between file list and address window: (Space-4-5 or F3) / (Space-1-2 or
Space-F3)
3. Enter the selected folder or open the selected file: Enter
4. Move back a level in the folder structure: Backspace
5. Jump to the drive list: Space-1-2-5-6
6. Move to the previous group of 20 items: Page up (space 1-2-6 or F1-F2)
7. Move to the next group of 20 items: Page down (space 3-4-5 or F3-F4)
8. Jump to a file or folder by pressing the first character of the folder or file name.
You must use ASCII characters.
4.1.2 Selecting Folders and Files
1. Select individual items "Space": * is displayed in front of the item to denote its
selection. Pressing "Space" again on the selected folder or file cancels the
selection.
2. Continuous selection "Enter-b": This selects all of the items from the point
where this command is executed to the item where the cursor is located. * appears
in front of the selected items.
