Chapter II Installation and Wiring of Drive
16
Chapter II Installation and Wiring of Drive
2.1 Drive installation environment
2.1.1 Installation environment requirements
(1) Install in a well-ventilated indoor place. The ambient temperature is required to be within the
range of -10ºC-40ºC. If the temperature exceeds 40ºC, external forced cooling or derating is
required.
(2) Avoid installing in places with direct sunlight, dusty, floating fibers and metal powder.
(3) Do not install in places with corrosive or explosive gases.
(4) The humidity is required to be lower than 90%RH, without condensation of water droplets.
(5) Install in places where the plane fixed vibration is less than 5.9 m/s
2
.
(6) Try to keep away from electromagnetic interference sources and other electronic instruments
and equipment that are sensitive to electromagnetic interference.
2.1.2 Installation direction and space
(1) Generally, vertical installation shall be adopted.
(2) Minimum installation intervals and distances are shown in Figure 2-1.
(3) When multiple drives are installed up and down, the baffle applied in the middle is shown in
Figure 2-2.
B
Fan exhaust
B
A
A
Deflector
D
riv
e
D
riv
e
Figure 2-1 Installation Diagram
Figure 2-2 Installation Diagram of Multiple Drives