Chapter V Basic Operation Instructions
151
Appendix I Communication Protocol
Networking mode
Figure 1: Schematic Diagram of Drive RS485 Networking Mode
Figure 2: Schematic Diagram of Drive Ethernet Networking Mode
The interface way
：
RS485
，
Asynchronous half duplex. Default
：
8-N-2
，
9600bps. See Fb group description for
parameter Settings.
Ethernet, full duplex. Default: IP address 192.168.1.30
，
Subnet mask 255.255.255.0
，
Gateway
192.168.1.1. See Fb group description for parameter Settings.
Protocol format
：
Modbus supports TCP, RTU, and ASCII modes. The corresponding frame formats are as
follows
：