HIMA HIMatrix F30, System Manual, Page: 59 / 110

System Manual Compact Systems 7 Start-Up
HI 800 141 E Rev. 2.02 Page 59 of 110
Variable Description Data
Type
Temperature state Bit-coded temperature state of the processor system
Value State
0x00 Normal temperature
0x01 Temperature threshold 1 exceeded
0x03 Temperature threshold 2 exceeded
0xFF Not available
BYTE
Remaining Global Force
Duration [ms] Time in ms until the time limit set for global forcing expires. DINT
Watchdog Time [ms] Maximum permissible duration of a RUN cycle in ms. UDINT
Cycle Time, last [ms] Current cycle time in ms UDINT
Cycle Time, max [ms] Maximum cycle time in ms UDINT
Cycle Time, min [ms] Minimum cycle time in ms UDINT
Cycle Time, average [ms] Average cycle time in ms UDINT
Table 32: Hardware System Variables for Reading the Parameters
7.3.1.5 Rack System Parameter Settings
The rack system parameters can be set in the Rack's online view.
Parameter Description Default
value
Type Spare, not changeable -
Name Rack name for the controller, text HIMatrix
F...Rack
Rack ID Not changeable 0
Temperature Monitoring With F*03 devices only!
Specifies the temperature threshold that, if exceeded, causes a
warning message to be created:

Warning at temperature thresholds 1 and 2

Warning at temperature threshold 2 only

Warning at temperature threshold 1 only

No warning at temperature thresholds 1 and 2
Warning at
temperature
thresholds 1
and 2
Table 33: System Parameters of the Rack
7.3.2 Configuring the Ethernet Interfaces
Ethernet interfaces are configured in the Detail View of the communication module. If the
remote I/Os have no communication module, the Ethernet interfaces are configured in the Detail
View of the processor module. Refer to the manuals of the HIMatrix controllers and remote I/Os
for more details.