HIMA HIMatrix F3 DIO 8/8 01, Manual, Page: 16 / 52

3 Product Description F3 DIO 8/8 01
Page 16 of 52 HI 800 179 E Rev. 2.00
3.2 Equipment, Scope of Delivery
The following table specifies the available remote I/O variants:
Designation Description
F3 DIO 8/8 01 Remote I/O (8 digital inputs, 8 digital outputs, 2 pulsed outputs),
Operating temperature: 0...+60 °C,
for ELOP II Factory programming tool
F3 DIO 8/8 014 Remote I/O (8 digital inputs, 8 digital outputs, 2 pulsed outputs),
Operating temperature: -25...+70 °C (temperature class T1),
Vibration and shock tested according to EN 50125-3 and EN 50155,
class 1B according to IEC 61373,
for ELOP II Factory programming tool
F3 DIO 8/8 01
SILworX Remote I/O (8 digital inputs, 8 digital outputs, 2 pulsed outputs),
Operating temperature: 0...+60 °C,
for SILworX programming tool
F3 DIO 8/8 014
SILworX Remote I/O (8 digital inputs, 8 digital outputs, 2 pulsed outputs),
Operating temperature: -25...+70 °C (temperature class T1),
Vibration and shock tested according to EN 50125-3 and EN 50155,
class 1B according to IEC 61373,
for SILworX programming tool
Table 4: Available Variants
3.2.1 IP Address and System ID (SRS)
A transparent label is delivered with the device to allow one to note the IP address and the
system ID (SRS for system rack slot) after a change.
IP___.___.___.___SRS____.__.__
Default value for IP address: 192.168.0.99
Default value for SRS: 60 000.200.0 (SILworX)
60 000.0.0 (ELOP II Factory)
The label must be affixed such that the ventilation slots in the housing are not obstructed.
Refer to the First Steps manual of the programming tool for more information on how to modify
the IP address and the system ID.