06/11
Page 9
Banding machine cannot be switched on at the control
panel
Check whether the light of the main switch at the back is on.
If so, the control panel is faulty (please contact customer ser-
vice).
Banding machine can be switched on but does not start
Check whether the front door protective contact is engaged
properly. Open the front door and close it with power. If the
banding machine still cannot be started, contact the custo-
mer service.
Banding machine switched off in the middle of a work
cycle and does not return to basic setting
Switch the machine off and on again with the main switch.
Press the On/Off button at the control panel, the machine will
return to the basic setting and be ready for use.
Banding machine stopped in the middle of a work cycle
Switch off main switch and check all flexible parts for easy
running. Remove possible obstructions and ensure that parts
are running smoothly. Check power supply and make sure
that the front door protective contact is engaged properly.
Caution
!
If the listed actions of remedy do not solve the respec-
tive problem, please contact the
HIMA
customer service.
Do not attempt to repair the machine (mechanical or
electronic parts, etc.) yourself as this will void the war-
ranty.
HIMA
Harald Hinderer Maschinenbau