Page 10
06/11
Setting up the banding machine with floor rack
– Fasten the castor break at the front of the floor rack.
– Remove existing transport locks.
– Place the banding machine on the floor rack so that the
legs of the banding machine fit into the recesses of the
rack.
Electric connection of banding machine to floor rack
– Plug the power cord of the banding machine into the
socket of the floor rack.
– Connect the power cord of the floor rack to a power outlet
(230 V, 50 Hz,16 A)
– Switch on main switch of the floor rack.
– Switch on main switch at the back of the banding machine.
– If required, plug in the foot actuator at the back of the banding
machine and tighten the plug with the screw.
– See page 7 for the operation.
HIMA
Harald Hinderer Maschinenbau