Hilti PR 30-HVSG, Original Operating Instructions

Page: 21 / 96

*2179604*
2179604 English 13
▶
The rotating laser levels itself on the Y-axis once the position has been reached. Successful
completion is indicated by a continuous signal tone with a duration of 5 seconds. The
symbol is displayed briefly.
▶
If automatic alignment cannot be completed successfully, short signal tones are emitted and the
is displayed briefly.
6. Stop automatic inclination before completion by double-clicking the button on the PRA 30G laser
receiver.
If the rotating laser begins the automatic search in the wrong direction, press the button to
change the search direction.
5.13 Manual scan line function
1. Press the button on the rotating laser.
2. Adjust the laser plane to the desired position / height. The scan line function can be used in horizontal,
vertical and inclined plane mode.
3. Press the button on the PRA 30G to display the menu.
4. Select the manual scan line function .
5. The width of the scan line can be set to one of four widths via the scan line width submenu.
6. After selecting the scan line function in the menu, the and symbols can be used to shift the laser
line to the left or right. The laser receiver does not require to be within the path of laser beam in order to
do this.
5.14 Automatic scan line function
1. Press the
button on the rotating laser.
2. Adjust the laser plane to the desired position / height. The scan line function can be used in horizontal,
vertical and inclined plane mode.
3. Press the
button on the PRA 30G to display the AUTO menu.
4. Start the automatic scan line function .
5. Bring the laser receiver into the desired position. The rotating laser automatically concentrates the beam
along a shortened line in the area of the laser receiver.
The width of the scan line can be adjusted using menu on the PRA 30G. The narrower the scan
line is set, the brighter it will appear.
6. After selecting the scan line function in the menu, the
and symbols can be used to shift the laser
line to the left or right. The laser receiver does not require to be within the path of laser beam in order to
do this.
5.15 Deactivating the shock warning function
1. Press the
button on the rotating laser.
2. Press the
button.
▶
The shock warning deactivation LED lights constantly, indicating that the function has been
deactivated.
To return to standard operating mode, switch the rotating laser off and then switch it back on again.
6 Operating the laser receiver
6.1 Inserting the batteries in the laser receiver 14
▶
Insert the batteries in the laser receiver.
Use only batteries that have been manufactured in accordance with international standards.