Hilti PR 30-HVSG A12, Manual

Page: 40 / 434

32 English
6. Stop automatic inclination before completion by double-clicking the
button on the PRA 30G laser
receiver.
Note
If the rotating laser begins the automatic search in the wrong direction, press the button to
change the search direction.
5.13 Manual scan line function
1. Press the button on the rotating laser.
2. Adjust the laser plane to the desired position / height. The scan line function can be used in horizontal,
vertical and inclined plane mode.
3. Press the
button on the PRA 30G to display the menu.
4. Select the manual scan line function .
5. The width of the scan line can be set to one of four widths via the scan line width submenu.
6. After selecting the scan line function in the menu, the
and symbols can be used to shift the laser
line to the left or right. The laser receiver does not require to be within the path of laser beam in order to
do this.
5.14 Automatic scan line function
1. Press the
button on the rotating laser.
2. Adjust the laser plane to the desired position / height. The scan line function can be used in horizontal,
vertical and inclined plane mode.
3. Press the
button on the PRA 30G to display the AUTO menu.
4. Start the automatic scan line function .
5. Bring the laser receiver into the desired position. The rotating laser automatically concentrates the beam
along a shortened line in the area of the laser receiver.
Note
The width of the scan line can be adjusted using menu on the PRA 30G. The narrower the scan
line is set, the brighter it will appear.
6. After selecting the scan line function in the menu, the
and symbols can be used to shift the laser
line to the left or right. The laser receiver does not require to be within the path of laser beam in order to
do this.
5.15 Deactivating the shock warning function
1. Press the button on the rotating laser.
2. Press the
button.
◁
The shock warning deactivation LED lights constantly, indicating that the function has been
deactivated.
Note
To return to standard operating mode, switch the rotating laser off and then switch it back on again.
6 Operating the laser receiver
6.1 Inserting the batteries in the laser receiver 14
▶
Insert the batteries in the laser receiver.
Note
Use only batteries that have been manufactured in accordance with international standards.
6.2 Pairing the rotating laser and the PRA 30G laser receiver
1. Position both tools at a distance of about 0.5 m from each other. Press the
button on both devices
for at least 3 seconds.
Printed: 29.09.2017 | Doc-Nr: PUB / 5377009 / 000 / 00