Hilti Nuron TE 500-22, Manual

Page: 19 / 188

*2310393*
2310393 Dansk 13
Trouble or fault Possible cause Action to be taken
Product does not start. The electronic restart interlock is
activated after an interruption in
the electric supply.
▶
Switch the product off and then
on again.
Service indicator shows. Service limit time reached.
▶
Have the product repaired by
Hilti Service.
Service indicator flashes. The product is faulty.
▶
Have the product repaired by
Hilti Service.
The ON/OFF indicator
flashes.
Product momentarily overloaded.
▶
Release the control switch and
then press it again.
Protection against overheating.
▶
Allow the product to cool down
and clean the air vents.
10 Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping gases or liquids.
▶
DO NOT send batteries through the mail!
▶
Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶
Dispose of your battery out of the reach of children.
▶
Dispose of the battery at your Hilti Store , or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales representative for further information.
▶
Do not dispose of power tools, electronic equipment or batteries as household waste!
11 Manufacturer’s warranty
▶
Please contact your local Hilti representative if you have questions about the warranty conditions.
12 Further information
For more information on operation, technology, environment and recycling, follow this link:
qr.hilti.com/manual/?id=2310391&id=2310393
This link is also to be found at the end of the documentation, in the form of a QR code.
Original brugsanvisning
1 Oplysninger vedrørende dokumentationen
1.1 Vedrørende denne dokumentation
• Læs denne dokumentation igennem før ibrugtagning. Det er en forudsætning for sikkert arbejde og
korrekt håndtering.
• Følg sikkerheds- og advarselshenvisningerne i denne dokumentation og på produktet.
• Opbevar altid brugsanvisningen sammen med produktet, og overdrag det kun til andre personer sammen
med denne anvisning.
1.2 Tegnforklaring
1.2.1 Advarsler
Advarsler advarer mod farer ved håndtering af produktet. Følgende signalord anvendes: