Hilti HAT 28, Manual, Page: 21 / 64

*286175*
286175 Français 13
Refilling with oil
▶
Frequent removal and reconnection of the pressure gage causes the oil level in the reservoir to drop. In
extreme cases this can result in the volume of oil dropping below the level necessary for the pressure
gage to show a correct reading.
Technical data
X > 6 mm … < 15 mm
▶
When this happens, it is advisable to bring the tester to a Hilti repair workshop for checking and refilling
with oil.
7 Transport and storage
• Store the product in a dry place, where it cannot be accessed by children or unauthorized persons.
• Check the product for damage before use after long periods of transport or storage.
8 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶
Do not dispose of power tools, electronic equipment or batteries as household waste!
9 Manufacturer’s warranty
▶
Please contact your local Hilti representative if you have questions about the warranty conditions.
10 Further information
For more information on operation, technology, environment and recycling, follow this link:
qr.hilti.com/manual?id=2320131
This link is also to be found at the end of the documentation, in the form of a QR code.
Mode d'emploi original
1 Indications relatives à la documentation
1.1 À propos de cette documentation
• Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement
requise pour assurer la sécurité du travail et un maniement sans perturbations.
• Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que
celles figurant sur le produit.
• Toujours conserver le mode d'emploi à proximité du produit et uniquement le transmettre à des tiers
avec ce mode d'emploi.
1.2 Explication des symboles
1.2.1 Avertissements
Les avertissements attirent l'attention sur des dangers liés à l'utilisation du produit. Les termes de
signalisation suivants sont utilisés :
DANGER
DANGER !
▶
Pour un danger imminent qui peut entraîner de graves blessures corporelles ou la mort.