Hilti GX90-WF, Manual

Page: 22 / 196

14 English 440645
*440645*
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶
Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
GX fastening tool GX 90-WF
Generation 01
Serial no.
1.5 Declaration of conformity
The manufacturer declares, on his sole responsibility, that the product described here complies with the
applicable legislation and standards. A copy of the declaration of conformity can be found at the end of this
documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany
2 Safety
2.1 Safety instructions
Requirements to be met by users
▶
The tool is intended for professional use.
▶
The tool may be operated, serviced and repaired only by authorized, trained personnel. This personnel
must be informed of any special hazards that may be encountered.
Personal safety
▶
Stay alert, watch what you are doing and use common sense when operating a direct fastening tool. Do
not use the tool when you are tired or under the influence of drugs, alcohol or medication. Take a break
if you experience pain or feel unwell. A moment of inattention while operating tools may result in serious
personal injury.
▶
Avoid unfavorable body positions. Make sure you work from a safe stance and stay in balance at all
times.
▶
Wear non-skid shoes.
▶
Never point the tool toward yourself or other persons.
▶
Never press the nose of the tool against your hand or other part of your body, or against another
person. Do not, under any circumstances, position your hand or other part of your body in the vicinity
of the nosepiece. Pressing the nosepiece against a part of the body can lead to severe injury, due to
unintentional actuation and firing of the fastener.
▶
Do not place your free hand directly behind the material being fastened.
▶
Do not position your free hand in the vicinity of the nosepiece.
▶
Keep other people away from the working area, especially children.
▶
Keep the arms slightly bent while operating the tool (do not straighten the arms).
▶
Both the user and any other persons in the vicinity must wear suitable personal protective equipment
including adequate eye protection, ear protectors and a hard hat.
Careful handling and use of direct fastening tools.
▶
Never leave a loaded tool unattended.
▶
Remove the gas can from the tool before transporting the tool.