Hilti GX-IE, Operating Instructions Manual

Page: 15 / 80

*2208859*
2208859 Français 11
Trouble or fault Possible cause Action to be taken
Concrete application only:
Fastener does not penetrate
deeply enough into the mate-
rial.
The system is unsuitable. The sup-
porting material is too hard.
▶
Contact Hilti Service.
Drive energy too low.
▶
Contact Hilti Service.
Surface of the material is too
uneven.
Surface of the material is too un-
even.
▶
Contact Hilti Service.
12 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶
Do not dispose of power tools, electronic equipment or batteries as household waste!
13 Manufacturer’s warranty
▶
Please contact your local Hilti representative if you have questions about the warranty conditions.
Mode d'emploi original
1 Indications relatives à la documentation
1.1 À propos de cette documentation
• Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement
requise pour assurer la sécurité du travail et un maniement sans perturbations.
• Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que
celles figurant sur le produit.
• Toujours conserver le mode d'emploi à proximité du produit et uniquement le transmettre à des tiers
avec ce mode d'emploi.