Hilti GTB 6X-22, Manual

Page: 13 / 60

*2332219*
2332219 English 7
3.6.2 Indicators showing the battery's state of health
To check the battery's state of health, press the release button and hold it down for longer than three
seconds. The system does not detect a potential malfunction of the battery due to misuse, for example
battery dropped or pierced, external heat damage, etc.
Status Meaning
All LEDs show in sequence, followed by one (1)
LED showing constantly green.
The battery can remain in use.
All LEDs show in sequence, followed by one (1)
LED quick-flashing yellow.
The check to ascertain the battery's state of health
did not complete. Repeat the procedure, or consult
Hilti Service.
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
4 Technical data
4.1 Product
Weight without battery B22 3 kg
(7 lb)
Rated voltage 21.6 V
Belt speed 3.8 m/s … 8.4 m/s
(12.5 ft/s … 27.6 ft/s)
Belt dimensions
30 in x 1 1⁄2 in
Belt tension 4 kg … 9 kg
(9 lb … 20 lb)
Arc of contact 270°
(4.7 rad)
Maximum pipe diameter 125 mm
(4.9 in)
Ambient temperature for operation −17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature −20 ℃ … 70 ℃
(−4 ℉ … 158 ℉)
4.2 Battery
Battery operating voltage 21.6 V
Weight, battery See the end of these
operating instructions
Ambient temperature for operation −17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature −20 ℃ … 40 ℃
(−4 ℉ … 104 ℉)
Battery charging starting temperature −10 ℃ … 45 ℃
(14 ℉ … 113 ℉)