![background image](http://html1.mh-extra.com/html/hilti/dx-6-gr/dx-6-gr_original-operating-instructions_2136100023.webp)
*2253454*
2253454
Français
15
Malfunction
Possible cause
Action to be taken
The cartridge strip melts
Fastener driving rate too high (fas-
tening tool overheated).
▶
Stop using the tool immediately.
▶
Remove cartridge strips and
allow the fastening tool to cool
down.
▶
Do not exceed the recom-
mended maximum fastener
driving rate (see the section
headed "Technical data").
A cartridge detaches itself
from the cartridge strip
Fastener driving rate too high (fas-
tening tool overheated).
▶
Stop using the tool immediately.
▶
Remove cartridge strips and
allow the fastening tool to cool
down.
▶
Do not exceed the recom-
mended maximum fastener
driving rate (see the section
headed "Technical data").
10
Disposal
Most of the materials from which
Hilti
tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to
Hilti
for recycling. Ask
Hilti
Service or your Hilti representative
for further information.
11
Manufacturer’s warranty
▶
Please contact your local
Hilti
representative if you have questions about the warranty conditions.
12
C.I.P. test confirmation
The following applies to C.I.P. member states outside the EU and EFTA judicial areas: The
Hilti
DX 6 has
been system and type tested. As a result, the tool bears the rectangular PTB approval mark showing
approval number S 1035.
Hilti
thus guarantees compliance with the approved type.
13
Further information
For more information on operation, technology, environment and recycling, follow this link:
qr.hilti.com/manual?id=2232123&id=2253454
This link is also to be found at the end of the documentation, in the form of a QR code.
Notice d'utilisation originale
1
Indications relatives à la documentation
1.1
À propos de cette documentation
• Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement
requise pour assurer la sécurité du travail et un maniement sans perturbations.
• Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que
celles figurant sur le produit.
• Toujours conserver le mode d'emploi à proximité du produit et uniquement le transmettre à des tiers
avec ce mode d'emploi.
Summary of Contents for DX 6-GR
