Hilti DSW 2005-TS, Manual

Page: 13 / 44

*2235115*
2235115 English 9
2.7 Danger zones and safety distances to be maintained
▶
The exclusion zone extends to at least twice the radius of the length of wire that would
be unleashed in the event of the wire breaking (L1) (L2) and the areas in the extended
axes of the directions in which the wire is running. This exclusion zone is not limited
unless suitable protective devices are installed (protective barriers or curtains, wire
guards, etc.). The protective devices must be designed and installed in such as way
that they prevent whiplash of the diamond sawing wire and safely and reliably stop
flying fragments or debris.
▶
Always keep a minimum distance of 1.5 m away from all movable parts during
operation.