![background image](http://html1.mh-extra.com/html/hilti/dch-150-sl/dch-150-sl_manual_2136072016.webp)
12
Français
2208336
*2208336*
Trouble or fault
Possible cause
Action to be taken
The power tool does not
achieve full power and the
service indicator is off.
The gauge (cross section) of the
extension cord conductors is inad-
equate.
▶
Use an extension cord with
an adequate conductor cross
section.
The power tool was overloaded
due to application of excessive
feed pressure.
▶
Reduce the feed pressure.
The power tool does not
achieve full power and the
service indicator flashes red.
The power tool has overheated due
to prolonged overloading.
▶
Wait a few moments until the
motor has cooled down or allow
the power tool to run under no
load in order to speed up the
cooling-down process.
Cutting performance is too
low.
Diamond slitting discs not suitable
for the material.
▶
Use suitable diamond slitting
discs.
Diamond slitting discs worn.
▶
Change the diamond slitting
discs.
10
Disposal
Most of the materials from which
Hilti
products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to
Hilti
for recycling. Ask
Hilti
Service or your Hilti sales representative for further information.
11
Manufacturer’s warranty
▶
Please contact your local
Hilti
representative if you have questions about the warranty conditions.
Notice d'utilisation originale
1
Indications relatives à la documentation
1.1
À propos de cette documentation
• Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement
requise pour assurer la sécurité du travail et un maniement sans perturbations.
• Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que
celles figurant sur le produit.
• Toujours conserver le mode d'emploi à proximité du produit et uniquement le transmettre à des tiers
avec ce mode d'emploi.
1.2
Explication des symboles
1.2.1 Avertissements
Les avertissements attirent l'attention sur des dangers liés à l'utilisation du produit. Les termes de
signalisation suivants sont utilisés :
DANGER
DANGER
!
▶
Pour un danger imminent qui peut entraîner de graves blessures corporelles ou la mort.
AVERTISSEMENT
AVERTISSEMENT
!
▶
Pour un danger potentiel qui peut entraîner de graves blessures corporelles ou la mort.
Summary of Contents for DCH 150-SL
